Portable EV Chargers

Questions

Which EVs are compatible?

Any EV with a Type 2 charging port, which covers almost every EV sold new in Australia: Tesla, BYD, MG, Hyundai, Kia, Polestar, Jaecoo, Geely, Denza, Zeeker, Mazda, Volvo, BMW, Mercedes-Benz, Nissan and more. Older or imported cars with a Type 1 port aren’t compatible. Not sure? Send us your make, model and year.

How long does it take to fully charge?

It depends on your battery size and outlet. For a typical 60 kWh battery charged from empty:

10A power point (2.2 kW): about 20 hours from empty for a 60 kWh battery (based on 15 km/h)
15A outlet (3.3 kW): about 13 hours (based on 23 km/h)
32A single-phase outlet (7.2 kW): about 6 hours (based on 50 km/h)
Three-phase (22 kW): about 2 hours (based on 150 km/h, if your car accepts 22 kW)

Most people top up overnight rather than charging from empty.

Can I use an extension cord?

No. Extension leads and power boards aren’t designed for the continuous load of EV charging and can overheat. Plug the charger directly into a suitable outlet, and use the 10 m, 15 m or 20 m cable option if you need more reach.

What's the difference between a “granny cable” and a portable EV charger?

The cable that comes with many EVs (often called a granny cable) is usually limited to a low current on a household socket. Our 2.2 kW plugs into any normal 10A power point and adds a screen, app, off-peak timer, IP67 protection and a 3-year Australian warranty. Faster Evtronix models need a matching 15A, 32A or three-phase outlet.

Can I leave it outside in the rain?

Yes. The control box and connector are rated IP67, so they’re protected against rain and spray. Don’t charge with the unit sitting in water, or if the cable or connector is damaged.

Can I charge from my solar panels?

Yes. Use the timer or the app to charge during the day while your panels are producing, and lower the charging current to better match what your solar system generates.

Do I need an electrician to use a portable EV charger?

Not for the 2.2 kW, which plugs into any normal power point. For the faster models, only if you need a new 15A, 32A or three-phase outlet.

Can I charge from a normal power point?

Yes, with our 2.2 kW. It has a standard 10A plug, so it plugs straight into any sound, RCD-protected power point and adds up to about 15 km of range per hour. Our faster models need a matching 15A, 32A or three-phase outlet.

Is a portable EV charger safe to leave plugged in overnight?

Yes. The control box monitors the connection and stops charging if it detects a fault, such as earth leakage, over-current or overheating.

Does it work with Tesla?

Yes. Teslas sold in Australia use a Type 2 port for AC charging, so they work with every Evtronix portable charger.

How long is the cable?

5 m as standard. The 2.2, 3.3, 7.2 and 22 kW also come in 10 m, 15 m and 20 m.

What certifications do your products hold?

Pro Series portable chargers are approved for sale in Australia and carry the RCM mark. They're covered by EESS Certificate of Suitability EESS-250879-0 and tested to IEC 62752:2024, the international safety standard for portable (Mode 2) EV chargers, by an accredited laboratory. Other safety features include IP67 weather protection, 30 mA AC / 6 mA DC residual-current protection and Type 2 connectors to IEC 62196-2. Email admin@evtronix.com.au for copies of our certification documents.