Certification
Approved for sale in Australia
Pro Series portable chargers are approved for sale in Australia and carry the RCM mark. They're covered by EESS Certificate of Suitability EESS-250879-0 and tested to IEC 62752:2024, the international safety standard for portable (Mode 2) EV chargers, by an accredited laboratory. Other safety features include IP67 weather protection, 30 mA AC / 6 mA DC residual-current protection and Type 2 connectors to IEC 62196-2.
RCM
RCM under AS/NZS 4417.1
Australia
The regulatory compliance mark that shows electrical equipment meets Australian requirements to be sold here.
EESS
EESS Certificate of Suitability (EESS-250879-0)
Australia
Certificate of Suitability issued by a JAS-ANZ accredited certification body. Certificate details can be checked on the JAS-ANZ certificate register.
CE
European Conformity
European Union
CE mark as shown on the product label, declaring conformity with applicable EU safety, health and EMC directives.
RoHS
Restriction of Hazardous Substances
International
RoHS mark as shown on the product label, indicating restriction of specified hazardous substances.
FCC
Federal Communications Commission
United States
FCC mark as shown on the product label for applicable radio/EMC requirements.
IEC 62752
IEC 62752:2024
International
The international safety standard for portable (Mode 2) EV chargers. Independently tested by an accredited laboratory.
IEC 62196-2
IEC 62196-2 Type 2
International
Defines the Type 2 connector Australia standardised on.
AS/NZS 3000
AS/NZS 3000:2018 Section 7.9
Australia
The installation standard your licensed electrician installs and certifies to when fitting a new outlet.
IP67
IP67 enclosure rating
International
Dust-tight and protected against temporary immersion, for normal outdoor use.
30 mA AC / 6 mA DC
Residual-current protection
International
Built-in leakage protection in the charger's control box, with an operating range of −30 °C to +50 °C.